1 d a t a s h e e t : c l d - c t 1 1 3 3 . 0 0 1 applications ? channel letter ? amusement cree ? p4 led cp42b-rks/aks data sheet this revolutionary package design allows the lighting designer to reduce the number of leds required and provide a more uniform and unique illuminated appearance than with other led solutions. this is possible through the effcient optical package design and high current capabilities. the low profle package can be easily coupled with refectors or lenses to effciently distribute light and provide the desired lit appearance. this product family employs green and blue led materials, which allow designers to match the color of many lighting applications like vehicle signal lamps and amusement lighting. features ? size (mm): 7.6 x 7.6 ? color and typical dominant wavelength (nm): red (624) amber (591) ? luminous flux (mlm) red (4400 - 11000) amber (5500 - 13200) ? lead-free ? rohs compliant subject to change without notice. www.cree.com/ledlamps
2 cld-ct1133.001 cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 fax: +1.919.313.5778 www.cree.com/ledlamps copyright ? 2009 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. absolute maximum ratings (t a = 25c) items symbol absolute maximum rating unit red/amber forward current i f 70 note1 ma peak forward current note2 i fp 200 ma reverse voltage v r 5 v power dissipation p d 210 mw operation temperature t opr -40 ~ +100 c storage temperature t stg -40 ~ +100 c lead soldering temperature t sol max. 260c for 5 sec. max. (3 mm from the base of the epoxy bulb) electrostatic discharge classifcation (mil-std-883e) esd class 2 note: 1. a heat sink is recommended if the device is operated at ambient temperatures higher than 25c. 2. pulse width 0.1 msec, duty 1/10. typical electrical & optical characteristics (t a = 25c) characteristics color symbol condition unit minimum typical maximum forward voltage red/amber v f i f = 70 ma v 2.5 3.0 reverse current red/amber i r v r = 5 v a 100 dominant wavelength red d i f = 70 ma nm 618 624 630 amber d i f = 70 ma nm 584 591 599 luminous flux red v i f = 70 ma mlm 4400 6000 amber v i f = 70 ma mlm 5500 7000 50% power angle red/amber 2? i f = 70 ma deg 120
3 cld-ct1133.001 cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 fax: +1.919.313.5778 www.cree.com/ledlamps copyright ? 2009 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. flux bin limit (i f = 70 ma) ? tolerance of measurement of luminous fux is 15% color bin limit (i f = 70 ma) vf bin limit (i f = 70 ma) ? tolerance of measurement of dominant wavelength is 1 nm red bin code min.(v) max.(v) 23 2.0 2.2 24 2.2 2.4 25 2.4 2.6 26 2.6 2.8 27 2.8 3.0 amber bin code min.(v) max.(v) 23 2.0 2.2 24 2.2 2.4 25 2.4 2.6 26 2.6 2.8 27 2.8 3.0 ? tolerance of measurement of vf is 0.05v amber bin code min.(nm) max.(nm) a2 584 587 a3 587 590 a4 590 593 a5 593 596 a6 596 599 red bin code min.(nm) max.(nm) ra 618 630 red bin code min.(mlm) max.(mlm) l0 4400 5500 m0 5500 6600 n0 6600 8730 p0 8730 11000 amber bin code min.(mlm) max.(mlm) m0 5500 6600 n0 6600 8730 p0 8730 11000 q0 11000 13200
4 cld-ct1133.001 cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 fax: +1.919.313.5778 www.cree.com/ledlamps copyright ? 2009 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. order code table* color kit number viewing angle luminous flux (mlm) dominant wavelength min. max. color bin min. (nm) color bin max. (nm) red cp42b-rks-cl0p0aa4 120 4400 11000 ra 618 ra 630 red cp42b-rks-cm0p0aa4 120 5500 11000 ra 618 ra 630 color kit number viewing angle luminous flux (mlm) dominant wavelength min. max. color bin min. (nm) color bin max. (nm) amber CP42B-AKS-CM0Q0264 120 5500 13200 a2 584 a6 599 amber cp42b-aks-cn0q0354 120 6600 13200 a3 587 a5 596 notes: 1. the above kit numbers represent order codes which include multiple fux-bin and color-bin codes. only one fux-bin code and one color-bin code will be shipped on each reel. and single fux-bin code,single color bin-codes will not be orderable. 2. please refer to the cree led lamp reliability test standards document for reliability test conditions. 3. please refer to the cree led lamp soldering & handling document for information about how to use this led product safely.
5 cld-ct1133.001 cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 fax: +1.919.313.5778 www.cree.com/ledlamps copyright ? 2009 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. graphs the above data are collected from statistical fgures that do not necessarily correspond to the actual parameters of each single led. hence, these data will be changed without further notice. ???????????????????????????????? ?????? ??????????????? ?????? ????? ??????? ??? ??? ??? ??? ??? ??? ?? ?? ?? ??? ?? ? ? ?? ?? ?? ??? ?? ?? ?? ?? ?? ??? ? ???????? ??? ????? ?????????????????????????????????? ???????????????????????? ?????????????????????????? ????????????????????? ????????????????????????????????? ???????????????????????? ????????????????????????????????????? ??????????? ??? ??? ??? ??? ??? ??? ???? ???? ???? ???? ????? ??? ??? ????? ??? ??? ????? ??? ??? ??? ??? ?????? ??? ??? ??? ??? ? ??? ????????????????????????????? ?????? ??? ??? ??? ??? ?? ???? ??? ??? ??? ??? ??? ??? ??? ??? ????? ??? ??? ??? ? ? ? ??? ??? ?? ?? ?? ????????????????????? ????? ???????????????????????? ????????????????????????????? ????????????????????????? ???????????????? ?
6 cld-ct1133.001 cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 fax: +1.919.313.5778 www.cree.com/ledlamps copyright ? 2009 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. mechanical dimensions all dimensions are in mm. tolerance is 0.25 mm unless otherwise noted. an epoxy meniscus may extend about 1.5 mm down the leads. burr around bottom of epoxy may be 0.5 mm max. notes rohs compliance the levels of environmentally sensitive, persistent biologically toxic (pbt), persistent organic pollutants (pop), or otherwise restricted materials in this product are below the maximum concentr ation values (also referred to as the threshold limits) permitted for such substances, or are used in an ex empted application, in accordance with eu direc - tive 2002/95/ec on the restriction of the use of certain hazardous substances in electrical and electronic equipment (rohs), as amended through april 21, 2006. vision advisory claim users should be cautioned not to stare at the light of this led product. the bright light can damage the ey e. ?
7 cld-ct1133.001 cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 fax: +1.919.313.5778 www.cree.com/ledlamps copyright ? 2009 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. kit number system cree led lamps are tested and sorted into performance bins. a bin is specifed b y ranges of color, forward voltage, and brightness. sorted leds are packaged for shipping in various convenient options. please refer to the cree led lamp packaging standard document for more information about shipping and packaging options. cree leds are sold by order codes in combinations of bins called kits. order codes are confgured in the following manner:
8 cld-ct1133.001 cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 fax: +1.919.313.5778 www.cree.com/ledlamps copyright ? 2009 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. package features: ? the leds are packed in cardboard boxes after packaging in normal or anti-electrostatic bags. ? cardboard boxes will be used to protect the leds from mechanical shock during transportation. ? the boxes are not water resistant, and they must be kept away from water and moisture. ? the tube pack type of packaging. ? max 60 pcs per tube. h u e xx ax xxx xxx xx x x c o l o r l e d l a mp j o w axxxxx - xx - xxx l xxxx x xxx - xxx l ot t ype xxx xxx vf xx iv x r a nk q t y p cs r r
|
